EN
DE
PRODUCTS
Our range of products focuses on stone and tile care
- Pre-treatment of ABSORBANT MATERIALS, such as granite, marble, tiles, porphyry, and many more before applying Finalit impregnations.
- Colour enhancer.
- Pre-treatment when floor heating is installed.
- Pre-treatment before laying and jointing. Jointing aid. Hardener. Bonding agent.
- The temperature of the object must be above +10°C.
- Suitable for all natural and artificial stones!
Use undiluted. 1 litre is sufficient for 100 m².
- Pre-treatment for HIGHLY ABSORBANT materials, such as sandstone, limestone, quartzite, concrete stone, terracotta and many more, before applying Finalit impregnations.
- Basic protection against stains and soiling.
- Consolidator.
- Use pre-treatment if a underfloor heating is installed.
- Use pre-treatment before laying and jointing.
- Jointing aid. Bonding agent. Limestone hardener (pyramids and the Sphinx in Egypt).
- Sandstone hardener (Petra in Jordan).
Important! As a pre-treatment for all sides (including edges) before laying, especially suitable for avoiding efflorescence, stains and joint edge discolouration.
Advantage of treatment on all sides:
- Grouting aid
- Prevents the penetration of moisture and soiling
- Prevents curling
- Prevents discolouration & flaking caused by salt, metals and frost.
- Prevents the penetration of adhesives / silicone with slabs
- Makes cleaning easier
- Protection for subsequent work, such as painter, carpenter, etc. Does not replace the need of covering against mechanical damage! The drying time is approx. 1 hour. The curing time is 24 hours.
Can be diluted 1:3 with water. 1 litre is sufficient for up to 50 m², on all sides 20 m², depending on the absorbing properties of the sub-surface.
- Long-term, transparent protection of heavily used surfaces against stains and soiling.
- Breathable. Transparent. The Goretex effect.
- Resistant to UV-rays, de-icing salt, chlorine. Food safe.
- Graffiti protection
- Penetrates up to 2 cm into the surface depending on the absorbency
- For indoors and outdoors! Drying time, 1 - 2 hours, curing time, 24 hours.
- EXPERTS REPORT for vapour diffusion (80% breathable)
- Expert report: Technical University of Cologne,
- MA 39 - Testing and Research Institute of the city of Vienna and the EMPA Institue, Switzerland
We recommend pre-treatment with Finalit No. 21 or 21S! Use undiluted. 1 litre is sufficient for 100m².
- Medium-term, transparent protection of heavily used surfaces against stains and soiling.
- Especially suitable for polished surfaces & fine stoneware, high solvent content.
- Breathable. The Goretex effect.
- Resistant against UV-rays, de-icing salt, chlorine. Food safe.
- Graffiti protection
- Penetrates up to 2cm into the surface depending on the absorbency
- For indoors and outdoors! Drying time, 1 - 2 hours, curing time, 24 hours.
- Synthetic polymer
- Does not contain wax, silicone or acrylate
- Stain-resistant and water-resistant
- Grain size: micro to nano
- Solvent: odourless white spirit
- For all natural and artificial stones
We recommend pre-treatment with Finalit No. 21 or 21S! Use undiluted. 1 litre is sufficient for 100m².
- High-gloss, long-term protection against environmental influences.
- Freshens up the gloss of floors, gloss finish for matt floors.
- For interior use only! The drying time is approx. 1-2 hours.
- For all natural and artificial stones as well as wood, parquet, laminat, plastic, PVC, rubber and linoleum surfaces.
The curing time is 24 hours. Can be diluted 1:3 with water. 1 litre is sufficient for 50 m²