ATTENTION! Remove any coatings beforehand using Finalit No. 5 Coating Remover!

Application areas:

• graffiti
• graffiti on vehicles, car lettering 
• graffiti on traffic signs 
• general adhesive residues and carpet, including adhesive 
• Lacquer and varnish residues 
• discolourations from felt-tipped pens, pencils

For all natural and artificial stones!

ATTENTION! Finalit No.7 may have a caustic effect on polished soft stone (e.g. marble, limestone)!
You need to make your own tests. 

• Use undiluted
• 1 kg is sufficient for 10 m² 
• Where possible, heat the surfaces to be treated 
• Apply using a sponge, brush or scraper 
• Exposure time approx. 5 – 60 minutes, then rub off or remove the coating using a scraper
• Then thoroughly rinse with water 
• Clean surfaces as well as tools with Finalit No.1 Intensive Cleaner 
• In special cases, it may be necessary to allow for a longer exposure time or to clean a second time. When removing graffiti on painted surfaces, the maximum exposure time is 30 seconds.
• You need to make your own tests!

• Graffiti removal and then cleaning, remove any rust discolouring with No. 12
• Graffiti on vehicles, car lettering, exposure time max. 3 minutes 
• Graffiti on traffic signs, the maximum exposure time is 20 seconds in order not to damage the reflective film 
• General adhesive residues and wallpaper including glue, exposure time up to 12 hours 
• When removing graffiti on painted surfaces or film, the maximum exposure time is 30 seconds 
• For the removal of adhesive residues on glass, paint, Plexiglas