Finalit No. 10 Algae and Moss Killer (acidic)

  • For controlling algae, moss, verdigris and mildew. 
  • High disinfection ability. Kills off all spores and moulds.
 

Can be diluted up to 1:5 with water depending on the degree of soiling. 1 l is sufficient for 20 m².

ATTENTION! Remove any coatings beforehand using Finalit No. 5 Coating Remover!
Siliconise wooden connections on the floor (e.g. doorframes) with transparent silicone


Application areas:

  • Kills off all spores and moulds
  • Algae (red, black, green), every algae comprises 20 different spores 
  • Verdigris / moss
  • Mildew 

For all natural and artificial stones, except polished soft stone!

ATTENTION! Finalit No.10 may have a caustic effect on polished soft stone (e.g. marble, limestone)!
You need to make your own tests.

  • Can be diluted up to 1:5 with water depending on the degree of soiling.
  • 1 l is sufficient for 20 m² 
  • If the surface to be renovated is badly soiled, clean first with a wire brush using Finalit No. 2 Radical 
  • If the surface is only superficially affected, apply the product direct to the surface 
  • Penetrates deep into the surface. Badly infested areas should be treated twice with No. 10 Algae and Moss Killer at intervals of 12 hours in order to kill off any existing fungus. 
  • The exposure time is 2 to 12 hours, preferably overnight 
  • Thoroughly rinse with water. 
  • Apply Finalit No.1 Intensive Cleaner diluted 1:20 with water - neutralising 
  • Allow to act for about 5 – 10 minutes  
  • Then thoroughly rinse with water 

For all natural and artificial stones, except polished soft stone!

ATTENTION! Finalit No.10 may have a caustic effect on polished soft stone (e.g. marble, limestone)!
You need to make your own tests.

  • Especially suitable for removing mildew and urine stains (in combination with Finalit No. 6 Lime Solvent)
  • In order to prevent further infestation of the cleaned surface, we recommend an impregnation. 
  • Mildew (removes all bacteria and spores over the long term to prevent it from breaking out again!) If cleaned only with a high-pressure cleaner, the algae returns with more intensity.
  • Remove any stubborn remnants, mould stains using Finalit No.12 Stain Killer 
  • Then impregnate with Finalit No. 21S, the fungicide is only available in a 5-litre container! Subsequent protection with Finalit No. 25 Premium-Cool Impregnation!