Finalit No. 22 Cool Impregnation

YOU ARE HERE:HomeProducts

Finalit No. 22 Cool Impregnation

  • Medium-term, transparent protection of heavily used surfaces against stains and soiling. 
  • Especially suitable for polished surfaces & fine stoneware, high solvent content.
  • Breathable. The Goretex effect.
  • Resistant against UV-rays, de-icing salt, chlorine. Food safe. 
  • Graffiti protection
  • Penetrates up to 2cm into the surface depending on the absorbency
  • For indoors and outdoors! Drying time, 1 - 2 hours, curing  time, 24 hours. 
  • Synthetic polymer  
  • Does not contain wax, silicone or acrylate 
  • Stain-resistant and water-resistant 
  • Grain size: micro to nano 
  • Solvent: odourless white spirit
  • For all natural and artificial stones

We recommend pre-treatment with Finalit No. 21 or 21S! Use undiluted. 1 litre is sufficient for 100m².

Quantities calculator

Short video Finalit No. 22 Cool Impregnation

Onlineshop

Hazard statements

H226 Flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways.
H336 May cause drowsiness or dizziness.

 

DANGER

  • Use undiluted
  • 1 l is sufficient for 100 m² 
  • The temperature of the object must be above +10°C. The surface to be treated must be clean and dry.
  • With highly absorbant materials, apply Finalit No. 21 Fixative Penetrating Stopper or Finalit No. 21S Pores Filler before treating with Finalit No. 22 Cool Impregnation.
  • Apply Finalit No. 22 undiluted to the clean and dry surface (1 to 2 times depending on surface absorbing capacity), spreading it evenly 
  • Especially with polished materials, wipe off any surplus of Finalit No. 22 with a cloth immediately after application. 
  • The drying time is approx. 1 - 2 hours, the curing  time is 24 hours. 
  • If streaks form (you have applied too much), then treat with hot air or apply Finalit No. 22 again and wipe off immediately with a cloth 
  • Can be polished using white synthetic pads and a high-speed machine. Recommended for polished floors.
  • You need to make your own tests. 
  • Finalit No. 22 does not form a closed film, which prevents flaking from occurring
  • Finalit No. 22 penetrates up to 5 mm into the surface depending on the absorbency 
  • The surfaces treated are breathable and resistant to water, stains, UV-rays and de-icing salt