• Pre-treatment of ABSORBANT MATERIALS, such as granite, marble, tiles, porphyry, and many more before applying Finalit impregnations. 
  • Colour enhancer. 
  • Pre-treatment when floor heating is installed. 
  • Pre-treatment before laying and jointing. Jointing aid. Hardener. Bonding agent. 
  • The temperature of the object must be above +10°C. 
 

Use undiluted. 1 litre is sufficient for 100 m².

  • Pre-treatment for HIGHLY ABSORBANT materials, such as sandstone, limestone, quartzite, concrete stone, terracotta and many more, before applying Finalit impregnations. 
  • Basic protection against stains and soiling. 
  • Consolidator.
  • Use pre-treatment if a underfloor heating is installed. 
  • Use pre-treatment before laying and jointing. 
  • Jointing aid. Bonding agent. Limestone hardener (pyramids and the Sphinx in Egypt). 
  • Sandstone hardener (Petra in Jordan). 

Important! As a pre-treatment for all sides (including edges) before laying, especially suitable for avoiding efflorescence, stains and joint edge discolouration. 

Advantage of treatment on all sides: 

  • Grouting aid
  • Prevents the penetration of moisture and soiling
  • Prevents curling
  • Prevents discolouration & flaking caused by salt, metals and frost.
  • Prevents the penetration of adhesives / silicone with slabs 
  • Makes cleaning easier 
  • Protection for subsequent work, such as painter, carpenter, etc. Does not replace the need of covering against mechanical damage! The drying time is approx. 1 hour. The curing time is 24 hours. 

Can be diluted 1:3 with water. 1 litre is sufficient for up to 50 m², on all sides 20 m², depending on the absorbing properties of the sub-surface.

  • Long-term protection of heavily used surfaces against stains and soiling. 
  • Breathable. Transparent. The Goretex effect. 
  • Resistant to UV-rays, de-icing salt, chlorine. Food safe. 
  • Graffiti protection. 
  • For indoors and outdoors! Drying time, 1 - 2 hours, curing time, 24 hours. 
  • Tested by the MA 39 Testing and Research Institute of the City of Vienna. 
 

We recommend pre-treatment with Finalit No. 21 or 21S! Use undiluted. 1 litre is sufficient for 100m². 

  • Medium-term protection of heavily used surfaces against stains and soiling. 
  • Especially suitable for polished surfaces & fine stoneware, high solvent content.
  • Breathable. The Goretex effect.
  • Transparent.
  • Resistant against UV-rays, de-icing salt, chlorine. Food safe. 
  • Graffiti protection. 
  • For indoors and outdoors! Drying time, 1 - 2 hours, curing  time, 24 hours. 

We recommend pre-treatment with Finalit No. 21 or 21S! Use undiluted. 1 litre is sufficient for 100m².

  • High-gloss, long-term protection against environmental influences. 
  • Freshens up the gloss of floors, gloss finish for matt floors. 
  • For interior use only! The drying time is approx. 1-2 hours. 

The curing time is 24 hours. Can be diluted 1:3 with water. 1 litre is sufficient for 50 m²