Finalit No. 7 Graffiti and Paint Remover (acidic)

  • Removes graffiti, graffiti on vehicles, graffiti on traffic signs, 
  • residues of adhesives, lacquer and varnish, adhesive film, car lettering, 
  • carpet and wallpaper adhesive, discolourations from felt-tipped pens, pencils. 

Use undiluted 1 litre is sufficient for 10 m².

Quantities calculator

ATTENTION! Remove any coatings beforehand using Finalit No. 5 Coating Remover!

Application areas:

  • graffiti
  • graffiti on vehicles, car lettering 
  • graffiti on traffic signs 
  • general adhesive residues and carpet, including adhesive 
  • Lacquer and varnish residues 
  • discolourations from felt-tipped pens, pencils

For all natural and artificial stones!

ATTENTION! Finalit No.7 may have a caustic effect on polished soft stone (e.g. marble, limestone)!
You need to make your own tests. 

 
  • Use undiluted
  • 1 kg is sufficient for 10 m² 
  • Where possible, heat the surfaces to be treated 
  • Apply using a sponge, brush or scraper 
  • Exposure time approx. 5 – 60 minutes, then rub off or remove the coating using a scraper
  • Then thoroughly rinse with water 
  • Clean surfaces as well as tools with Finalit No.1 Intensive Cleaner 
  • In special cases, it may be necessary to allow for a longer exposure time or to clean a second time. When removing graffiti on painted surfaces, the maximum exposure time is 30 seconds.
  • You need to make your own tests!
  • Graffiti removal and then cleaning, remove any rust discolouring with No. 12
  • Graffiti on vehicles, car lettering, exposure time max. 3 minutes 
  • Graffiti on traffic signs, the maximum exposure time is 20 seconds in order not to damage the reflective film 
  • General adhesive residues and wallpaper including glue, exposure time up to 12 hours 
  • When removing graffiti on painted surfaces or film, the maximum exposure time is 30 seconds 
  • For the removal of adhesive residues on glass, paint, Plexiglas