Finalit No. 22 Cool Impregnation

  • Medium-term protection of heavily used surfaces against stains and soiling. 
  • Especially suitable for polished surfaces & fine stoneware, high solvent content.
  • Breathable. The Goretex effect.
  • Transparent.
  • Resistant against UV-rays, de-icing salt, chlorine. Food safe. 
  • Graffiti protection. 
  • For indoors and outdoors! Drying time, 1 - 2 hours, curing  time, 24 hours. 

We recommend pre-treatment with Finalit No. 21 or 21S! Use undiluted. 1 litre is sufficient for 100m².

We recommend pre-treatment with Finalit No. 21 or 21S!

Especially suitable for polished surfaces & fine stoneware, high solvent content. 

  • The Goretex effect 
  • Medium-term, transparent protection against stains and soiling 
  • Resistant to UV-rays, de-icing salt, chlorine 
  • Breathable / food safe 
  • Penetrates up to 2cm into the surface depending on the absorbency. 
  • Excellent graffiti protection 
  • Synthetic polymer  
  • Does not contain wax, silicone or acrylate 
  • Stain-resistant and water-resistant 
  • Grain size: micro to nano 
  • Solvent: odourless white spirit

For all natural and artificial stones!

  • Use undiluted
  • 1 l is sufficient for 100 m² 
  • The temperature of the object must be above +10°C. The surface to be treated must be clean and dry.
  • With highly absorbant materials, apply Finalit No. 21 Fixative Penetrating Stopper or Finalit No. 21S Pores Filler before treating with Finalit No. 22 Cool Impregnation.
  • Apply Finalit No. 22 undiluted to the clean and dry surface (1 to 2 times depending on surface absorbing capacity), spreading it evenly 
  • Especially with polished materials, wipe off any surplus of Finalit No. 22 with a cloth immediately after application. 
  • The drying time is approx. 1 - 2 hours, the curing  time is 24 hours. 
  • If streaks form (you have applied too much), then treat with hot air or apply Finalit No. 22 again and wipe off immediately with a cloth 
  • Can be polished using white synthetic pads and a high-speed machine. Recommended for polished floors.
  • You need to make your own tests. 
  • Finalit No. 22 does not form a closed film, which prevents flaking from occurring
  • Finalit No. 22 penetrates up to 5 mm into the surface depending on the absorbency 
  • The surfaces treated are breathable and resistant to water, stains, UV-rays and de-icing salt