Finalit No. 21 Fixative Penetrating Stopper

  • Pre-treatment of ABSORBANT MATERIALS, such as granite, marble, tiles, porphyry, and many more before applying Finalit impregnations. 
  • Colour enhancer. 
  • Pre-treatment when floor heating is installed. 
  • Pre-treatment before laying and jointing. Jointing aid. Hardener. Bonding agent. 
  • The temperature of the object must be above +10°C. 
 

Use undiluted. 1 litre is sufficient for 100 m².

  • Pore filler/ hardener / bonding agent
  • Colour enhancer, wet effect! Intensified by applying twice. Colour intensification is not possible on polished materials, the final colour is already reached!
  • Important! With underfloor heating, always apply before the impregnation in order to avoid a sagging of the impregnation.
  • Only apply in conjunction with subsequent impregnation and never alone, soiling!
  • To achieve stronger slip resistance do not rinse subsequently. Apply generously using cotton strips to achieve a homogeneous flow, also good to polish 
 

Suitable for all natural and artificial stones!

  • Use undiluted
  •  1 l is sufficient for 100 m² 
  • The temperature of the object must be above +10°C. The surface to be processed must be clean and dry.
     
  • 1. Absorbent (matt) materials:
  •  Apply Finalit No. 21 Fixative Penetrating Stopper on the clean and dry surface using cotton strips or a roller or spray it on 
  • The exposure time is up to 1 hour 
  • Then impregnate (recommended)
     
  • 2. Polished (glossy) materials:
  • Apply Finalit No. 21 Fixative Penetrating Stopper on the clean and dry surface using cotton strips or a roller or spray it on. Wipe away excess agent immediately.
  • The exposure time is up to 1 hour, then polish using white synthetic pads and a high-speed machine
  •  If streaks form (you have applied too much), then apply Finalit No. 21 Fixative Penetrating Stopper again and wipe it away immediately with a cloth 
  • Then impregnate (recommended). Wipe away the surplus of the impregnation immediately after applying and after it is dry, polish using white synthetic pads and a high-speed machine 
  • You need to make your own tests.

For all natural and artificial stones!

Surpluses when pretreating and impregnating

  • Surpluses or footprints can be removed using products containing solvents of the same product 
  • Apply the product again and rub off immediately applying pressure
  •  Applies for: No.21, No.20, No.22, No.24, No.25, No.30
  • Remove surpluses or footprints of aqueus products with No. 5 Coating Remover