Finalit No. 1 Intensive Cleaner (basic)

  • For the basic cleaning of badly soiled surfaces. 
  • Stain remover, grout cleaner, high grease absorber, mould remover. 
  • NEUTRALISER FOR ALL ACIDIC CLEANERS! 

Can be diluted up to 1:20 with water depending on the degree of soiling. 1 litre is sufficient for 80 m².

Quantities calculator

Short video Finalit No. 1 Intensive Cleaner

Onlineshop

ATTENTION:Remove any coatings beforehand using Finalit No. 5 Coating Remover! 

Application areas:

  • Removal of formwork oil on exposed concrete surfaces 
  • "Fresh" grease and oil stains still on the surface (removal by saponification)
  • Also removes small fresh stains, e.g. blood, cola, milk, wine, coffee, jam, etc.
  • xylolite floors (= wood shavings and cement / vacuum away No. 1 immediately; otherwise, the chippings swell).

For all natural and engineerd stones! 

ATTENTION! Finalit No.1 may have a caustic effect on polished soft stone (e.g. marble, limestone)! You need to make your own tests.

Short film: Removal using a squeegee

  • Can be diluted up to 1:20 with water depending on the degree of soiling.
  • 1 litre is sufficient for 80 m². 
  • Apply, rub in with a brush and allow to soak for 5-10 minutes.
  • Then thoroughly rinse with water.

Special stain removal, such as grease stains, red wine stains, etc.:

  • Apply Finalit undiluted No.1 and cover with plastic sheet 
  • Exposure time 1 to 12 hours 
  • Then thoroughly rinse with water 
  • Finalit No.1 may have a slightly caustic effect on polished soft stone.
  • You need to make your own tests.